DURKOPP ADLER 767 - Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Aksesori Mesin Jahit DURKOPP ADLER 767 -. DURKOPP ADLER 767 - 18 halaman. Converting bobbin hook clb 300
Juga untuk DURKOPP ADLER 767 -: Petunjuk Manual (16 halaman), Panduan Petunjuk Instalasi (16 halaman)

Halaman Cetak

2.4 Reel stand

The structure and position of the reel stand 1 can be seen in the illustration.

–

Fit reel stand 1 and secure it with nuts 2 and washers 3.

–

Fit reel-stand holder and take-up arms.

The reel-stand holder and take-up arms must be vertically in line.

2.5 Working height

Working height is adjustable between 750 and 900 mm. It is pre-set at 790 mm prior to

delivery.

–

Loosen screw 4 on both sides of the frame.

–

Place the machine at the desired working height and ensure that it is level.

–

Retighten screw 4 on both sides of the frame.

The shift linkage 6 between the pedal and the motor-control cabinet must be adjusted in

line with the working height.

–

Loosen screw 7.

–

Adjust pedal 5.

Operatives must be able to move the pedal freely forwards and backwards.

–

Retighten screw 7.

2.6 Knee lever

The knee lever is used to raise the sewing feet mechanically.

–

Fit knee lever with hinges into hollow shaft 8 and engage.