DURKOPP ADLER 767 - Panduan Petunjuk Instalasi - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Mesin Jahit DURKOPP ADLER 767 -. DURKOPP ADLER 767 - 16 halaman. Converting bobbin hook clb 300
Juga untuk DURKOPP ADLER 767 -: Buku Petunjuk (18 halaman), Petunjuk Manual (16 halaman)
Halaman Cetak
3.3 Checking positioning
The sewing machine should be positioned with the thread lever at top dead centre.
The position transmitter 2 is fixed to the shaft with the position-transmitter ring 1. With
fully-assembled sewing machines the pre-set position is indicated by a coloured mark.
Checking positioning
–
Switch on the sewing machine. Pull pedal fully back and hold it there.
The thread is clipped and the sewing machine positioned in the 2nd position.
–
Check with the handwheel whether the thread lever is at top dead centre.
Correcting positioning
If positioning is incorrect the reference point must be reset with the control unit.
This adjustment is described in the service manual.
1
2
GB
9