DURKOPP ADLER 806 Panduan Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Aksesori Mesin Jahit DURKOPP ADLER 806. DURKOPP ADLER 806 19 halaman.

2.2

Balancing the sewing unit

2.3

2.4

2.5

The four feet 6 serve to centre the sewing unit. Make sure that the

weight is evenly distributed on the four feet.

–

Place a level on the stand.

–

Loosen the locknut 7.

–

Alter the height by turning the foot 6.

–

Tighten the locknut 7.

–

Insert the reel stand 1 in the bore hole of the reel-stand carrier 3.

–

Clamp the reel stand with the clamping lever 2 so that the thread

guide runs in parallel to the head of the sewing machine.

–

Clamp the stacker plates for the pocket cuts on the supporting

barÿ4 using two fixing screws.

–

Align the stacker plates for the sewing material.

–

Put the DAC control unit into the bore hole 5 of the folding station

cover.

–

Fix the DAC control unit using the fixing screw.

–

Insert the plug into the back of the DAC control unit.