4G Systems XSBox MOVE Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan 4G Systems XSBox MOVE. 4G Systems XSBox MOVE 2 halaman.

Halaman Cetak

XSBox

MOVE

Insert the Battery

Skip this step if you are planning a stationary use of

the device without battery.

Set the power switch to OFF

and insert the battery as

shown.

Connect power supply

When using the battery, it should be fully charged

once for at least 3-4 hours before using the device

for the first time. This ensures maximum lifetime of

the Li-Ion battery cells.

Afterwards power up the

XSBox

MOVE

by setting the

power switch to the ON position.

It takes some seconds before the device is ready and

you may continue configuration.

Running the wizard

The easiest way to configure the

using the wizard. Select the wizard checkbox and click

on enter.

On the next screen you will be shown an overview of

the following configuration steps.

Quick Start Guide

The default Wi-Fi settings are: SSID "default", chan-

nel 11, no encryption.

Open a web browser (e.g. Internet Explorer, Firefox,

Safari etc.) and type in the default IP address

http://192.168.123.254 of the

Note:

be configured to retrieve its IP address via DHCP or

have an IP address within the same subnet as the

XSBox

First thing suggested to be done is to change the default

XSBox

MOVE

password "admin" to a more complex and secret one.

Type in the current password "admin" and choose a new one

which must be entered twice. Afterwards click on "Next".

Try to automatically detect your timezone using the

button or select one from the dropdown list manually.

Click on "Next".

Connect 3G USB-Modem

Establish a connection

XSBox

The network adapter of your computer must

MOVE.

Choosing a new password

Selecting the local timezone

Skip this step to use the device with Wi-Fi only.

Connect the RJ-45 cable to the "Ethernet" jack of the

XSBox

MOVE

your network switch or directly to

your computer.

After being connected to the

first screen you will see is the status page where you

can log into the configuration interface.

MOVE.

Enter the default password "admin" to the field

"System Password" and click the "Login" button.

Selecting WAN type

Now you must select the appropriate method to

connect to the internet. In this example, we will

connect using a 3G USB modem and therefore will

select "3G USB Modem". Click "Next".

Setup a LAN link

and the other end to a free port of

Logging in

XSBox

MOVE

, the