Addspace 011 7027 Series Petunjuk Perakitan Langkah Demi Langkah - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Perakitan Langkah Demi Langkah untuk Perabotan Dalam Ruangan Addspace 011 7027 Series. Addspace 011 7027 Series 4 halaman. Tall bookcase

STEP 4
SQUARE UNIT UP
YY
XX
DIAG 1
XX
YY
YY
XX
STEP 9
DIAG 2
YY
XX
YY
XX
DIAG 3
XX
YY
STEP 5
hh
ii
ALIGN BACK PANEL (5695)
SO THAT THERE IS A EQUAL
GAP FROM THE EDGE OF
END PANELS (5703 AND
5704) THEN
SECURE THIS IN PLACE.
STEP 6
dd
DECIDE AT WHAT HEIGHT
YOU REQUIRE YOUR
SHELVES THEN
PUSH IN SHELF STUDS
IN TO END L/H (5703) AND
R/H(5704).
THEN LOCATE SHELVES.
IMPORTANT!
ENSURE A TAPE
MEASURE IS USED
TO SQUARE UP UNIT!
BEFORE SECURING THE
BACK IT IS NECESSARY
TO SQUARE UP THE UNIT.
YOU CAN DO THIS BY
MEASURING BETWEEN
XX-XX AND YY-YY
ENSURING THESE ARE THE
SAME (DIAG 1). IF THEY
ARE NOT (DIAG 2) APPLY
SLIGHT PRESSURE AS
INDICATED (DIAG 3) UNTIL
THEY ARE THE SAME.
ATTACH 3mm BACK PANEL
Fittings you will need in this step:
hh
ii
(x1)
(x60)
USE THE NAIL GUIDE WHEN
LOCATING THE NAILS.
THIS WILL HOLD THE NAILS
VERTICAL AND ENSURE THE
CORRECT DISTANCE FROM
THE EDGE.
LIFT UNIT UP
LOCATE SHELVES AND OVERBALANCE BRACKET
ll
dd
(x1)
(x12)
CONGRATULATIONS YOUR UNIT IS COMPLETE
PLEASE NOTE:TO KEEP YOUR UNIT IN PERFECT CONDITION CLEAN ONLY WITH A SOFT DAMP CLOTH.DO NOT USE
ANY ABRASIVE CHEMICAL CLEANERS. DO NOT SUBJECT YOUR UNIT TO HEAT OR MOISTURE. I E BY
PLACING HOT OR DAMP CUPS ETC ON ANY OF THE SURFACES.
WE RECOMMEND THAT THE UNIT IS LIFTED AND NOT DRAGGED.
XX
YY
hh
mm
(x2)
PAGE 4
XX
We recommend that this
unit is fixed to a suitable
wall to prevent possible
overbalancing. We have
included a fixing bracket for
this. No fixing screws are
provided as they will need
to suit the wall type, and
the length of screw will
depend on the distance
from the back of the unit to
the wall. Please ensure
fixings used are appropriate
Please take care when
drilling into the wall,
avoiding any pipes or wires.
If in doubt consult a
MEASURE TO
EXTERNAL
CORNERS.
YY
to your wall type.
qualified person.