Duro-Med 501-3012 Series Petunjuk Untuk Perakitan - Halaman 6
Jelajahi secara online atau unduh pdf Petunjuk Untuk Perakitan untuk Bantuan Mobilitas Duro-Med 501-3012 Series. Duro-Med 501-3012 Series 8 halaman. Lightweight aluminum hemi rollator
Halaman CetakU S E O F
N E W R O L L AT O R
B E F O R E U S E , P L E A S E R E A D A L L C A U T I O N
A N D W A R N I N G L A B E L S O N T H E R O L L A T O R
W A L K I N G
This unit is to be used as a mobility aid
creating a natural balance. With hands grasped
securely onto handles, the user walks slowly
behind the rollator. Gently, push forward with
weight distributed evenly between handlebars.
B R A K I N G
Normal Brake can be activated by pulling the
brake handle up, similar to operating the
brakes of a bicycle. This function may be
applied while walking with the rollator to slow
down momentum, stopping for a moment, or
WALKING MADE EASY
maneuvering around obstacles which may be
in your path.
Parking Brake can be activated by pushing
the handle down into the lock position. This
function should be activated when the user
stops for a period of time. For safety reasons,
SQUEEZE TO STOP
the parking brake should always be engaged
before sitting down onto the seat. Also if
shopping, it will be a good idea to activate the
parking brake while stopped in an aisle, to
avoid rollator from advancing forward. To
release the parking brake, gently pull up.
RELEASE TO ROLL
The braking system is convenient and easy to
operate. People who may have hand
disabilities should find the brake handles wide,
comfortable and non binding. Minimum
pressure will need to be applied to activate the
locking loop brake system.
F O L D I N G
PUSH DOWN TO LOCK
Remove basket before folding any rollator.
From the user side of the unit, grasp the
folding strap located under the hinged seat
and lift into the folded position. The rollator will
fold easily for storage or transport.
M A I N T E N A N C E
Always make sure your brakes are operating
correctly before leaving home. Keep the
brake handles free from dirt, dust and grime.
Build-up of particles could cause your brakes
not to engage properly. If the brakes are not
functioning, check the cables for looseness.
The cables can be tightened at the adjuster
screw located where the cable is connected
to the brake handle. If the cable is broken, it
will need to be replaced. Periodically check
LIFT SEAT AND PULL
STRAP TO ENGAGE
and tighten all nuts, bolts, screws and other
FOLDING MECHANISM
hardware located on the rollator.
w w w . d u r o m e d . c o m