Data-Tronix DT-UPS-1200 Manual - Halaman 3

Jelajahi secara online atau unduh pdf Manual untuk UPS Data-Tronix DT-UPS-1200. Data-Tronix DT-UPS-1200 8 halaman. Dt-ups series

INSTALLATION AND OPERATION

Before installation, please read and understand the following instructions.

Inspect the following items inside box:

User's Manual

UPS

UNPACKING AND INSPECTION

Examine the packing carton for damage. Notify your dealer immediately if damage is observed. Store the packing in a

safe place for possible future shipment of the UPS.

PLACE THE UPS

Position the UPS on a sturdy, dry surface in a well-ventilated area away from direct sources of heat. Leave at least

100mm clearance all around the UPS to provide adequate ventilation (Reference figure 1).

100MM

UPS

Figure 1

Figure 2

The UPS is intended for indoor use only. Although your UPS is very rugged, its internal components are not sealed

from the environment. Please kindly note the following (Reference figure 2).

Avoid direct sunlight

Avoid excessive heat

Avoid excessive humidity or liquids

Avoid excessive dust

CONNECT THE UPS TO A 110VAC POWER OUTLET

Connect the Power Cord to a verified grounded 3-wire receptacle. Do not power the UPS using a surge suppressor or

power strip. Switch the main supply SWITCH ON (Reference figure 3).

UPS OUTLET

FUSE

UTILITY INPUT

MAINS

OUTLET

Figure 3