ABYSS BATTERY 36V20A Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengisi Daya Baterai ABYSS BATTERY 36V20A. ABYSS BATTERY 36V20A 14 halaman. Onboard marine lithium battery charger

Halaman Cetak

1. MATCHING THE CHARGER WITH "AC POWER GRID"

Match for chargers and AC power grid: Before using the charger, please make sure the AC power grid

voltage and its frequency are in the range specified in the "Basic Parameters" label. If the voltage is below the

nominal input voltage, the charger will reduce the charging current or shut down for protection (AC voltage

is less than 90V), and it will affect battery charging performance.

Match for the charger and battery pack: There is applied battery specification in the "Basic Parameters"

label on the charger side. Please confirm whether battery type (flooded lead-acid batteries, sealed

maintenance-free batteries, lithium batteries, nickel-metal hydride batteries, nickel-cadmium batteries, etc),

the battery capacity (AH), and battery pack rated voltage (V)match those on the "Basic Parameters" label. If

they do not match, it is likely to cause less charge or overcharge and even cause permanent damage to the

battery pack, bringing serious economic losses.

2. AC POWER WIRE, DC CHARGING CABLE POLARITY,

AC input wire is at the rear of the charger: I, N, and Earth are, marked on the input line plug. Please

distinguish correctly. I, N, earth on AC plug should correspond with those of socket outlet. the Earth wire of

the AC input socket should be connected firmly to the ground, otherwise, the shell leaks electricity or

electrostatic and easily causes injury.

The charging output line is in front of the charger: You can distinguish the positive and negative of the

output line by colors. Red or Brown line is to connect battery "+" and Blue or Black to battery "-"(except for

special requirements of customers). The special connection of charging polarity with batteries polarity

depends on special charging plugs, sockets, and user special requirements. The

polarity of the charging socket should be consistent with the polarity of the charging plug polarity, otherwise,

it cannot charge. Please check before using.

OPERATION METHOD:

AND THE "BATTERY PACK"

AND PRECAUTIONS

WWW.ABYSSBATTERY.COM

Lithium Battery Charger User Manual