Addvent AVC090QETBLV Petunjuk Instalasi

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Kipas angin Addvent AVC090QETBLV. Addvent AVC090QETBLV 2 halaman. Centrifugal extractor fan

Halaman Cetak

DIAGRAM 4

Flush Fit

SURFACE MOUNT

208

255

FLUSH MOUNT

208

255

DDVENT

Telephone 0117 923 5375 Fax 0117 923 5374

Victoria Road Avonmouth Bristol BS11 9DB

Dimensions

Recess/Flush&

Surface Mount

Front View

Surface Mount

N/A

225

Installation Instructions for

CENTRIFUGAL EXTRACTOR FAN - 12VDC

Switch off mains supply before making any electrical

connections.

Installation must be supervised by a qualified electrician.

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory and mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning the use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children

without supervision.

Precautions must be taken to avoid the back-flow of gases

into the room from the open flue of gas or other open-fire

appliances when mounted in outside windows or walls.

Fan must be disconnected from electrical power before any

maintenance is carried out.

Location

1. When installing fan through an external wall,

an external wall grille must be fitted at all

times.

2. For best results this Extractor Fan should

be fitted as high on the wall as possible, or

if preferred, on the ceiling. Note: Pullcord

models should not be installed in a ceiling.

3. Do not install the unit within a shower

cubicle or anywhere else where there is a

N/A

risk of being sprayed with water (Please

see our range of showerfans for these

178

installations.).

4. If the fan is installed in a room containing

a fuel burning appliance, the installer must

ensure that the air replacement is adequate

for both the fan and the fuel burning

appliance.

077606

06/14

the AVC090QETBLV

Wiring

1. Switch off mains supply before making

electrical connections. If in any doubt

contact a qualified electrician.

2. These units are for fixed wiring only. A

flexible cord must not be used. All wiring

must be fixed securely and the cable to

the fan should be a minimum of 1mm

section. All wiring must comply with current

I.E.E. Regulations or local regulations if

outside the UK.

3. A double pole fused spur having contact

separation of at least 3mm in all pole must

be used and fitted with a 3A fuse.

4. This fan is double insulated and does not

require an earth connection.

5. The fan should not be accessible to a

person using either the shower or the bath.