DataCard SD460 Panduan Pemasangan Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemasangan Cepat untuk Laminator DataCard SD460. DataCard SD460 16 halaman. For printers using the datacard xps card printer driver, usb and network
Juga untuk DataCard SD460: Panduan Pemasangan Cepat (10 halaman), Panduan Pemasangan Cepat (8 halaman), Panduan Memulai Cepat (7 halaman)

Halaman Cetak

SD460 Laminating System Quick Install Guide

6. Power On the System

Press the power button on the front of the printer. The

printer and laminator perform internal checks and initialize

supplies.

The laminator contains heaters for the L1 and L2

cartridges, and for the impresser if one is installed. It can

take several minutes for the heaters to reach their correct

operating temperature before the system is ready to print

cards.

7. Install the Card Printer Driver

Refer to the SD and CD Series Card Printers Quick Install

Guide or the printer's Driver Guide to install the Card

Printer Driver and connect the system to a single PC or to

a network.

SD460 SLM Laminating System