Durr EcoGun 615 Panduan Pengoperasian dan Pemeliharaan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Penyemprot Cat Durr EcoGun 615. Durr EcoGun 615 20 halaman. Automatic air spraying gun

Halaman Cetak

EcoGun 615

SAFETY PRINCIPLES FOR OPERATION OF EQUIP-

MENT

FOR SPRAYING OF LIQUIDS

Earthing of the equipment (for combustible applied materials)

Under certain circumstances, high flow rates of the liquid and

high spraying pressure can results in generation of the electrostatic

change on the equipment. Its discharge may result in sparks of

flames. Thus the equipment must be earthed for spraying of the

combustible materials. Earthing connection - see Commissioning.

Work with Automatic Gun

Never put your hand and/or fingers in front of the gun. During the

nozzle assembly or disassembly, resp. its cleaning or whenever the

work is interrupted proceed very carefully and ensure that the gun

is always secured against possible activation. This prevents possible

subsequent injury.

Injury of Operator

Injury caused by applied material can be very severe. In case of

the injury immediately search the doctor and notify him on type of

the material causing the injury.

Personal Occupational Protection

During spraying and handling with the applied materials and

during cleaning of the equipment strictly follow the instructions of

manufacturers of the materials. Protect the skin and respiratory tract

by means of the personal protecting equipments (clothes, gloves,

respirators, protecting masks, resp. respirators, protecting creams

etc.).

Pressure Resistance

Adhere to maximum operating pressure of the material, as well

as maximum operating values of compressed air (recommended

values see the technical parameters).

Connecting Hoses

Angular socket couplings enable connection of the control air

hose of outer diameter 6.0mm and of spraying air hose of outer

diameter 8.0mm without need of any special fixing pieces. Fittings

for connection of the NH hose is fitted with the cap clamping nut for

safe and perfect connection of the hose of diameter 8.0x6.0mm.