Durr EcoGun 648 Panduan Pengoperasian - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Penyemprot Cat Durr EcoGun 648. Durr EcoGun 648 16 halaman. Automatic spraying gun
Halaman CetakEcoGun 648
USE
The EcoGun 648 automatic spray gun is designed for the surface
treatment of products by air spraying. The nozzle system is designed
for the pressure supply of applied material and is recommended for
the spraying of coating substances (hereinafter referred to as NH),
while it can also be used for spraying other materials, which by their
composition, do not damage the material of the spraying gun. As
the route of the NH is stainless, including the nozzle system, the
gun can be used for all applied materials. The gun is constructed for
remote control with separate air inlets for the control of the gun and
for spraying. It is possible to directly control the volume of material
on the gun and the form of the stream (flat or round).
For fully automated operation, automated guns can be completed
by equipment for automatic control and programming the width of
the spray. In this case, all the benefits of the automatic spray gun
will be put to full use.
6
setting the form of the stream (flat or round). After mounting
the threading for the automatic supply of the wing air with
angular coupling (not included in the delivery), it is possible
to be separately remotely controlled by means of a two-way
electromagnetic valve.