CAVE-TEK TeamUp P20 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kamera Digital CAVE-TEK TeamUp P20. CAVE-TEK TeamUp P20 20 halaman.

CAVE-TEK TeamUp P20 Camera

4.8 COMMUNICATION SETUP

Move the main menu cursor to [COMMUNICATION SETUP], and press [HOME] key enter the

communication setup page, as shown in the following figure.

Protocol: Control protocol type, Auto, VISCA, PELCO-D, PELCO-P.

V_Address: 1 ~ 7. (Effective only in Auto, VISCA protocol).

V_AddrFix: On, Off (When set to On, useless in 88 30 01 FF Command).

P_D_Address: 0 ~ 254. (Effective only in PELCO-D protocol).

P_P_Address: 0 ~ 31. (Effective only in PELCO-P protocol).

Net Mode: Set the serial port network control, Serial, Paral.

Baudrate: Serial port baud rate, 2400, 4800, 9600, 38400.

Move the main menu cursor to [RESTORE DEFAULT], and press [HOME] key enter the restore default page,

as shown in the following figure.

Restore: Confirm restore factory settings, Yes, No.

Note: Press [HOME] button to confirm, all parameter restore default, include IR Remote address and VISICA

address.

COMMUNICATION SETUP

Protocol

V_Address

V_AddrFix

Net Mode

Baudrate

Select Item

Change Value

[Menu] Back

RESTORE DEFAULT

Restore?

Change Value

[Home] OK

[Menu] Back

VISCA

Off

Serial

9600

User Guide