4IPNET EAP701 Panduan Instalasi Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Titik Akses Nirkabel 4IPNET EAP701. 4IPNET EAP701 18 halaman. Enterprise access point
Halaman Cetak
Hardware Installation
Please follow the steps mentioned below to install the hardware of EAP701:
Step 1. Place the EAP701 at the best location. The best location is usually at the center of your intended
wireless network. The EAP701 supports two types of mounting;
a) Surface Mounting Panel
a)
Surface Mount: Mountable on any flat surface. You may choose to connect your uplink cable the slit on the side
or in through the back.
b)
Wall Outlet Mount: This Wall Outlet mount can be fitted on any US standard outlet box.
Secure the mounting plate on the mounting surface by tightening the screws (included) at the
highlighted area below:
Copyright © 4IPNET, INC. All rights reserved.
EAP701 Enterprise Access Point
b) Outlet Mount Panel
4
Quick Installation Guide
ENGLISH