ELRO AG400011 Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Keamanan ELRO AG400011. ELRO AG400011 5 halaman. Home alarm system with smartphone app & dialer
Juga untuk ELRO AG400011: Panduan Memulai Cepat (6 halaman)

Halaman Cetak

Step 10 – Adding numbers for Alarm notification

1. Press Setting, alerts and type the number in any of the available spaces.

2. Photo Id numbers for calling or SMS may be added.

Note: Adding a contact into the SMS list will also enable that

contact to have limited access of the GSM panel using the App.

They can Arm/Partial Arm/Disarm the system but do not have

access to other settings.

Step 11 – Customize RFID and Zone names

1. Press settings in the app, then tags, to rename RFID tags

2. Select the tag that you wish to customize.

3. Select a person from contact list including image and then enter the image and name.

4. An SMS may be sent to notify of the system change.

5. Press Zones to rename security accessories

6. Rename the zones according to the device locations for example "Main door".

7. If the changes are successful, the user will receive a confirmation SMS

Step 12 – Change Default PIN code

It is advised to change the default system PIN code to prevent unauthorized any access to

your alarm panel.

1. To do so, on the alarm panel enter

1234

2. After hearing the beep, enter the new 4-digit PIN code +

****

3. To make sure the new PIN code has been changed, try to arm the system.

****

4. The system should arm successfully using the new PIN code.

Step 13 – Final test before mounting the system

Perform a quick test after the system has been set up and configured.

1. First Disarm the system using the App

2. Re-arm the system using the App

3. Trigger an alarm using the PIR and door/window detector.

4. Use the remote control to turn off the alarm once it has been triggered.

5. Check the notifications to ensure that they are correct.

Daily operations from alarm panel:

Function Button Icon

Remark

Arm

Activates the alarm for monitoring.

Disarm

Deactivates the alarm.

Note: To conserve its battery life, the PIR Motion sensor

can be triggered only once every 2 minutes.

Action

Enter (PIN code) +

Enter (PIN code ) +