ELRO AG400011 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Keamanan ELRO AG400011. ELRO AG400011 6 halaman. Home alarm system with smartphone app & dialer
Juga untuk ELRO AG400011: Panduan Memulai Cepat (5 halaman)

Halaman Cetak

HOME ALARM

AG400011

AG4000 Alarm panel

Congratulations on your purchase of the ELRO AG400011 Home Alarm system. You have just

purchased one of the most advanced and feature-rich wireless security systems on the market

today.

This quick start guide describes how to install your security system (alarm panel, remote,

door/window contact, PIR motion sensor, and RFID Alarm Tags). For a full explanation of all the

functions of the system, you can consult the full manual at www.elro.eu.

ALARM PANEL OVERVIEW

A. Touch keypad

D. RFID sensor area

G. Battery cover

B. Microphone

E. GSM status led

H. Wall mounting bracket

C. Siren

F. Speaker

– Quick Start Guide

AG40MA11A

AG40RE11

AG40PR11A

door/window

Remote

PIR Motion sensor

contact

AG40TA13

Alarm Tags

Step 1 – Power on and SIM Card Installation

1. Remove the battery cover of the alarm panel.

2. Insert a SIM card into the slot and connect the Li-ion cell 2000mAh 3.7V and the 9V power

adapter.

Note: The SIM card must be unlocked before use. You can use a mobile phone to cancel the

input of a PIN code or PUK code.

3. Wait until the GSM status LED blinks slowly (once every 3 seconds) indicating that the SIM

card is ready for use.

Step 2 – Insert the batteries

1. Install batteries in the included accessories.

2. Open the PIR motion sensor's rear cover and insert the 3 included AA batteries. (Figure A)

3. Twist open the battery cover of the remote control using a coin and insert the coin cell

battery inside. (Figure B). Replace the cover and press any key to ensure the red LED on the

remote lights up.

4. Open the door/window contact battery cover and insert the 3 included AAA batteries.

(Figure C)

Step 3 – Setting up the GSM host number

1. Make a new contact in your phone's address book for the alarm panel (for instance called

'Home Alarm'), and input the number of the SIM card that you placed in the alarm panel.

2. To program your phone number in the alarm panel, follow these steps:

1234

(example: 1234 + 66 +

+ 09 5555 1212 +

Owner's

Phone number

)