4IPNET EAP706 Panduan Instalasi Cepat - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Titik Akses Nirkabel 4IPNET EAP706. 4IPNET EAP706 19 halaman. Enterprise access point

Halaman Cetak

Step 4. Configure WDS (Wireless Distribution System) Settings (Optional)

To extend the wireless coverage, EAP705 supports up to 4 WDS links for connecting wirelessly to other

WDS-capable APs, or peer APs. By default, all WDS profiles are disabled.

 Click on the Wireless button on the main menu.

 Select the Repeater tab.

 Choose WDS as the Repeater Type.

 Choose the desired RF for WES (optional).

 Choose the desired WDS profile:

(a) Enable WDS.

(b) Enter the Remote AP MAC Address (peer AP) and then Click SAVE.

If you are using another EAP705 as the peer AP, simply repeat the above-mentioned steps to configure

another peer AP(s).

On each and every configuration page, you may click SAVE to save the changes of your configured

settings, but you must reboot the system for the changes to take effect. After clicking SAVE, the



Note:

following message will appear: "Some modifications have been saved and will take effect after

REBOOT."

EAP706 Enterprise Access Point

Quick Installation Guide

ENGLISH