Durr Dental VISTACAM2 Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Peralatan gigi Durr Dental VISTACAM2. Durr Dental VISTACAM2 13 halaman.

Halaman Cetak

6.5 Mounting on the VistaCart

When mounting on the VistaCart the Docking-

station is positioned in the guide rail of the

side supports. The Docking-station can be

mounted vertically or slightly at an angle.

Procedure:

• Remove the cover on the side support.

• Slide the spring nut into the guide rail into

the guide rail relevant to final Docking-

station position.

• Pass the screw through the outmost of the

four drill holes and tighten in the spring nut.

When mounting in this position do not

attach the rubber foot pads of the

Docking-station, otherwise the front

rail of the Docking-station will not lie

flush.

7. ELECTRICAL CONNECTION

The Docking-station should be connected as

per the VistaCam2. See the Installation and

Operating Instructions delivered together with

the DÜRR VistaCam2.

Order No. 9000-618-13/01