4IPNET EAP740 Buku Pegangan - Halaman 11

Jelajahi secara online atau unduh pdf Buku Pegangan untuk Titik Akses Nirkabel 4IPNET EAP740. 4IPNET EAP740 19 halaman. Enterprise access point

4IPNET EAP740 Buku Pegangan

Getting Started

4ipnet EAP740 supports web-based configuration. When hardware installation is complete, EAP740 can be
configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0
and above.
The default values of LAN IP address and subnet mask of EAP740 are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Steps:
1. To access the Web Management Interface, connect the administrator PC to the Uplink port of EAP740 via
an Ethernet cable. Then, set a static IP address on the same subnet mask as EAP740 in TCP/IP of your
PC, such as the following example:
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
2. Launch the web browser on your PC by entering the IP address of EAP740 (http://192.168.1.1) in the
address field, and then press Enter.
Example of entering EAP740's default IP Address via a web browser
3. The following Admin Login Page will appear. Enter "admin" for both the Username and Password fields,
and then click Login.
Copyright © 4IPNET, INC. All rights reserved.
Administrator Login Page
6
EAP740 Enterprise Access Point
Handbook
ENGLISH