Addvent AVACSPL12N Petunjuk Instalasi dan Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Panduan Pengguna untuk Pendingin Udara Addvent AVACSPL12N. Addvent AVACSPL12N 17 halaman. Split air conditioners

Halaman Cetak
AVACSPL12+18Ninstructions
Preparing to use the appliance

Indoor unit

Before starting to programme the remote control:
G
Plug into the mains, press the power switch on the indoor unit.

Remote control

Setting real-time
G
Open back cover, put in batteries
G
Press reset button see figure 12.
G
Press clock set button see figure 13.
G
Press
G
Press clock set button again, replace the back cover see figure 13.
Control Operation Remote
G
The signal can reach within six meters directly in front of indoor unit.
G
when the button is pressed, indoor unit will beep once or twice, indicating
the receiving of the signal.
G
If no beep is heard, press again.
G
Always handle remote control carefully.
When mounting on the wall
G
Select a place where indoor unit can receive remote control signal, and fix
the holder.
Remote Control cannot be used

(emergency operation)

G
In case the batteries in the remote controller have gone flat, or the remote
controller is faulty, use emergency switch see figure 3a.
Press emergency operation switch.
G
Every time the button is pressed, it changes in sequence of emergency
Auto stop.
G
In the first 30 minutes, the temperature adjustment will not work, it will
maintain continuous operation and air flow see figure 14.
G
Press this button when the unit is on, the unit turn off.
G
Press this button when the unit is set on or off-timer mode, then the unit
stop the present mode and will be in stand by state.
12/3/08
09:06
Page 11
(time setting button) and set correct time
Prior to operation
Figure 11
Figure 12
Figure 13
Figure 14
OPERATION
SET TEMPERATURE
AIR SPEED
AIR DIRECTING BLADES
11
Cooling
Heating
24°C
24°C
Medium
Medium
Auto
Auto