Durst M 670 COLOR Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Kaca pembesar Durst M 670 COLOR. Durst M 670 COLOR 16 halaman.

~---15

28----\.,.,..

~-26

18------1~

If your enlarger is the Durst M 670

COlOR,

fix the 100 watt

12 volt tungsten-halogen lamp (18) in the colour mixing head

(15) so that the lamp itself is between the lamp support (26)

and the retaining spring (27) with the stud on the lamp reflector

pointing down and engaged. The lamp must be correctly

located in the lamp support which automatically centres the

lamp and so ensures even illumination.

Never touch the inside surface of the reflector (28) with your

fingers.

From below place the blanking plate (19) over the opening

for the black-and-white lamp fitting and secure with the milled

screw (29).

Place the colour mixing head (15) over the lower section of

the enlarger head (4) and secure with the two milled

screws (24).

Below the colour mixing head (15) fit the mixing box (17)

supplied with the two milled screws (25) provided for the

purpose. To do this, first slack off the milled screws, engage

the two cutouts of the mixing box (17) under the milled screws

(25) and screw the latter tight.

Plug the lead of the M 670 COlOR into the socket of the

TRA 305 transformer or of the EST 305 voltage stabiliser. Plug

the lead from the transformer or voltage stabiliser into the

socket of the exposure timer and the lead of the latter into a

mains supply socket.

In the negative carrier (7) insert the SIVOMA 35 format mask

(8) - with the lettering up - into the top section and the

SIXMA 35 mask (with the lettering down) into the lower section

of the negative carrier.

Push the negative carrier into its opening in the enlarger head.

Fully screw the lens (30) to be used into the lens board (11).

Fit the lens and board in the lens carrier (31) and secure

with the milled screw (32) so that the aperture scale is visible

from the front.

IMPORTANT:

Enclosed with the Ourst M 670 BW and the Ourst M 670 COlOR

is a diffuser and a retaining spring. These are used in the red

8"-----'