Addvent AVIK40W Petunjuk Instalasi dan Panduan Pengguna
Jelajahi secara online atau unduh pdf Petunjuk Instalasi dan Panduan Pengguna untuk Peralatan Rumput dan Taman Addvent AVIK40W. Addvent AVIK40W 2 halaman. Low energy insect killers
Halaman CetakAVIKW[16]instructions
18/3/16
09:58
Maintenance
Cleaning
G
Always disconnect the power before any
maintenance.
G
Slide out the collection tray to remove and throw
away the bodies of insects.
G
The body of the unit should only need occasional
wiping over with a damp cloth and mild
detergent..
Changing the lamps
G
Step 1: Disconnect the power
G
Step 2: Remove the collection tray to gain access
G
Step 3a: Rotate the lamp anticlockwise, to remove
them.
Step 3b: Install the new lamp by rotating the lamp
clockwise.
G
Step 4: After replacing lamp, replace the
collection tray.
NOTE: if the Insect Killer is free-standing, remove the collection tray and turn the
unit upside down to gain access to the lamps.
Specifications
AVIK20W and AVIK40W
Electrical Ratings
Model AVIK20W: Ratings: 220-240V ~ 50/60Hz;
1 x 20W E-27 3U UV Energy Saving Lamp;
Model AVIK40W: Ratings: 220-240V ~ 50Hz; 2500V max;
2 x 20W E-27 3U UV Energy Saving Lamp;
ONE YEAR
EXCHANGE
1
Waste electrical products should not be disposed of with household waste. Please recycle where
facilities exist. Check with your local authority or retailer for recycling advice
Telephone: 0117 923 5375
Victoria Road, Avonmouth, Bristol BS11 9DB www.addvent.co.uk
Page 1
AVIKW
AVIK20W and AVIK40W
STEP 3a
STEP 3b
Fax: 0117 923 5374
ISSUE 1/0316
AVIK20W and AVIK40W
Low Energy Insect Killers
Installation Instructions and User Guide
IMPORTANT SAFEGUARDS
WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY
PRECAUTIONS SHOULD ALWAYS BE FOLLOWED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY
AND RETAIN FOR FUTURE REFERENCE