DATAGRABBER Rapid RH L6 Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pencatat Data DATAGRABBER Rapid RH L6. DATAGRABBER Rapid RH L6 20 halaman.

WAGNER METERS

DataGrabber with Bluetooth

A pop-up window will appear on the RH Reading screen if

detecting an installed DataGrabber with Bluetooth device

for the first time. In addition, if you are in proximity of any

DataGrabber with Bluetooth units installed in L6 sensors, on

the Devices screen the unit with the greatest signal strength will

appear as the first unit at the top, followed by other DataGrabber

units within Bluetooth range. You can begin to configure your

DataGrabber units (see the Configuration section).

DataGrabber (without Bluetooth)

Use the Total Reader with the DataGrabber to connect to the

DataMaster L6 app on your mobile device. A pop-up window

will appear on the RH Reading screen if detecting an installed

DataGrabber device for the first time. IMPORTANT: You must

connect the Total Reader with the DataGrabber TWICE for it to

start working. The first time initializes the DataGrabber device,

and the second time verifies that the device is taking readings. If

you transfer the DataGrabber to a new L6 Smart Sensor, you will

need to repeat this process.

Whenever the Total Reader is properly connected to the

DataGrabber, it will appear on the app's Devices screen, as

named, along with any DataGrabber with Bluetooth devices.

You can now select your DataGrabber device and configure its

settings as needed.

NOTE

: On the Devices screen, you can easily identify the type

of device that is connected to your L6 sensor by the icon to the

left of the Device name:

WWW.RAPIDRH.COM

DataGrabber with Bluetooth

DataGrabber

Total Reader