Datakom DKG-190 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol Datakom DKG-190. Datakom DKG-190 8 halaman. Battery charge controller

DKG-190 User Manual

DISPLAYS AND PUSHBUTTON FUNCTIONS

Mains Led

Generator Led

AC Output Led

MAINS LED: Turns on when the mains is

available. Turns off when the mains fails.

When the mains is restrored, flashes

during the adjusted mains waiting timer

(0-30 minute).

GENERATOR LED: Turns off when the

genset is stopped. Turns on when the

genset voltage is within limits.

AC OUTPUT LED: Turns on if the

internal AC voltage is produced.

BUTTON

FUNCTION

Switches the screen to the next parameter.

HELD PRESSED DURING 3 SECONDS:

The genset goes to the TEST mode. The engine will run during

the adjusted test timer and then stops. If any button is pressed

during the test the genset stops immediately.

Programming mode: increases the value.

Programming mode: decreases the value.

HELD PRESSED DURING 3 SECONDS:

Goes to lamp test mode for 3 seconds.

HELD PRESSED TOGETHER DURING 3 SECONDS:

Goes to program mode. Or exits program mode.

BATTERY LED: Turns on id the battery

voltage is normal. Flashes if the genset is

running and the voltage is normal. Turns

off if the battery voltage is low.

VDC LED: Turns on when the battery

voltage is displayed.

HOURS LED: Turns on when the screen

displays the running timer.

-5-

V-1.1

(24.03.2015)

Battery Led

VDC Led

Hours Led