Elsema WK433 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Keyboard Elsema WK433. Elsema WK433 6 halaman.

Once the keypad code is programmed, the keypad needs to be programmed to the receiver.

Programming the keypad to the receiver

Procedure

1. Connect power to the receiver

2. Press and release the learn button on

the receiver

3. Type the code combination on the

keypad and press

4. Type the code combination again on

the keypad and press

Deleting the Keypad from the

receiver

Press and hold the learn button for 10sec

Release the learn button

Technical Data for the receiver

Supply Voltage

Current Consumption

Receiving Frequency

Operating Temperature Range -5 to 50°C

Output

Dimensions

Weight

Red LED will blink once and then turns OFF

Red LED comes ON and stays ON

Red LED turns OFF

Red LED blinks fast for 3seconds and turns

OFF

Red LED turn On and stays ON

Red LED Turns OFF

12- 24 Volts AC/DC

30mA standby, 70mA with relay ON

433.920MHz

Change over relay output, rated at 1A at 24VDC

78 x 44 x 25mm

80g

LED