Datakom DKG-175 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Datakom DKG-175. Datakom DKG-175 11 halaman. Automatic transfer switch

DKG-175 User Manual

DESCRIPTION

Datakom DKG-175 is a DIN Rail mounted ATS

controller not requiring DC supply. Thanks to this

feature, it is not required to carry the DC supply from

the battery to the transfer panels, providing ease of

installation.

The unit monitors 3-phase mains voltages, sends

remote start command to the generating set and

performs changeover of both generator and mains

contactors.

The front panel leds provide information about mains

and generator power availability as well as contactor

positions. Moreover, mains phase voltages and

frequency can be seen on front panel.

Mains voltage and frequency high and low limits,

mains waiting timer, mains fail timer, generator start

delay, cooldown timer and mains contactor timer are

front panel programmable. Generator contactor timer

is adjustable between 1 and 40 seconds through front

panel knob.

DKG-175 AUTOMATIC

TRANSFER SWITCH

(WITHOUT DC SUPPLY)

DIN Rail mounted

No DC supply required

Mains phase order check

Adjustable MCB and GCB delays

Programmable mains frequency and voltage high

and low limits

Programmable delay timers

10A/250VAC MCB and GCB outputs

10A/28VDC remote start output

Isolated mains and genset inputs

Test mode

V-1

(24.07.2017)

FEATURES