Cayin HA-300 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penguat Cayin HA-300. Cayin HA-300 19 halaman. Direct heated triode tube headphone amplifier

Halaman Cetak

_Preparation_

Umbilical Power cable



Connecting Umbilical Power cable and AC Power cord

After connecting the speaker and source equipment, connect the AC power cord and

umbilical power cord to the Amplifier

 Umbilical Power Cord Connection

Position the alignment groove of screw-threaded connector on the umbilical power cord

against the alignment pin of power input/output connector of the amplifier/power supply unit,

push the umbilical power cord into the connector and start to turn the screw-threaded

connector clockwise until the connector is secured and is difficult to turn further with bare

hand. Complete the connection by repeating the process with the other end of the screw-

thread connector on the umbilical power cord.

 Please leave ample space around the power socket so that the power cord can be

easily disconnected.

 Connect power cord after all equipment and speakers are connected p.

 It is normal that the transformers will emit heat when the amplifier is used for long hours



Please unplug the power plug if you won't use the amplifier for a long time。

 Please make sure the AC voltage of your local power supply match the voltage of the

amplifier. Cayin will not be responsible for the damage or accidents such as fire caused by

incorrect input voltage

Screw-threaded

connector

Attention

Connect to AC

Power Supply