DataLocker Sentry K300 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Papan tombol DataLocker Sentry K300. DataLocker Sentry K300 19 halaman. Encrypted keypad mssd with oled screen
Juga untuk DataLocker Sentry K300: Panduan Penyebaran (10 halaman), Panduan Peninjau (10 halaman)

Halaman Cetak

1. Password Reset

2. Once the password is conﬁrmed, the Sentry K300 will change the password back to the default

of '1234567' and prompt to change the password.

3. The password should be changed to something secure. Continuing to use the Sentry K300

without changing the password will result in the device forcing a password change. For more

information see

Important: A password recovery code can only be used once. The Sentry K300 must be unlocked

SafeConsole Mode

code can be generated. Failure to do so could cause lose of access to the device and the data

on it if the password is forgotten again.

Unlocking In Read-Only Mode

You can unlock your device in a read-only state so that ﬁles cannot be altered on your secure drive.

For example, when using an untrusted or unknown computer, unlocking your device in Read-Only

Mode will prevent any malware on that computer from infecting your device or modifying your ﬁles.

Managed devices can be forced to unlock in a read-only state by an administrator.

When working in this mode, the DataLocker Control Panel will display the text Read-Only Mode.

In this mode, you cannot perform any operations that involve modifying ﬁles on the device. For

example, you cannot reformat the device, restore applications or edit the Applications List, or edit

ﬁles on the drive.

To unlock the device in Read-Only Mode through the Control Panel:

1. Unlock and Connect the device into the USB port of the host computer, then run the Un-

locker.exe.

2. Check the Read-Only Checkbox below the Unlock button.

3. Type your device password and click Unlock. The DataLocker Control Panel will appear with

the text Read-Only Mode at the bottom.

To unlock the device in Read-Only Mode from the keypad:

1. Enter the password on the Sentry K300.

2. In the connection menu select READ ONLY MODE, then connect the Sentry K300 to the

computer.

Note: Unlocking in Read-Only Mode from the keypad also works in Standalone mode.

Changing The Unlock Message

The Unlock Message is custom text that displays in the Unlocker window when you unlock the device.

This feature allows you to customize the message that displays. For example, adding classiﬁcation

labels can help identify which documents can be saved to the device due to company policy.

To change the Unlock Message:

1. In the DataLocker Control Panel, click Settings on the menu bar.

2. Click Preferences in the left sidebar.

3. Type the message text in the Unlock Message ﬁeld. The text must ﬁt in the space provided

(approximately 7 lines and 200 characters).

Changing Device Password

with a valid connection to SafeConsole before a new password recovery

Sentry K300 Managed User Guide