DataLocker Sentry K300 Panduan Penyebaran - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Penyebaran untuk Papan tombol DataLocker Sentry K300. DataLocker Sentry K300 10 halaman. Encrypted keypad mssd with oled screen
Juga untuk DataLocker Sentry K300: Panduan Pengguna (19 halaman), Panduan Peninjau (10 halaman)

Halaman Cetak

Once the device is assigned to the new user, the K300 can be given to the End User along with the

Password Reset Code, which will force the End User to create their own password. The Password

Reset Code is found by following the steps below.

Password Reset

Because authentication happens before the Unlocker client is launched, password reset works

differently on the Sentry K300 compared to other SafeConsole Ready Devices. Along with the

normal password to unlock the K300, a secure password will be created after registering to Safe-

Console. When this password is entered to the K300 it will set the original password back to the

default '1234567' and force the user to create a new password. Users should be made aware that

password reset is available if they forget their password, as to not cause data loss by entering an

incorrect password 20 times. The following steps should be taken when a password reset is needed:

1. A SafeConsole Administrator should log into the SafeConsole server.

2. Locate the K300 by referencing the serial number, which can be found by going to Manage,

then Drive.

3. Click the device's serial number to open the Device Details screen.

4. Click Reset password.

Sentry K300 SafeConsole Deployment guide