cayke back2backDESK Panduan Instalasi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Perabotan Dalam Ruangan cayke back2backDESK. cayke back2backDESK 20 halaman.
Halaman Cetak
3
ASSEMBLE THE BEAMS AND COLUMNS TO
THE TOP SUPPORTS
Remove tape from column assembly. Align top
support holes with column and beam assembly.
Assemble using the M8-1.25 x 12mm length
screws (4 per column). The maximum tightening
torque for these screws is 24Nm (18 ft-lbs).
Repeat for remaining columns.
4A
(FOR ELECTRICAL SYSTEM UPGRADE ONLY)
ASSEMBLE ELECTRICAL
See page 14
4B
ASSEMBLE THE CABLE TRAY
Align and insert the tabs on the u-channel into
the tray. Squeeze the u-channel so that all tabs
are secured into the tray.
ASSEMBLY INSTRUCTIONS
| 9