Datalogic DS2x00N-DS4800 Series Prosedur Pengaturan Menggunakan Kode Batang Pemrograman - Halaman 4
Jelajahi secara online atau unduh pdf Prosedur Pengaturan Menggunakan Kode Batang Pemrograman untuk Pembaca kode batang Datalogic DS2x00N-DS4800 Series. Datalogic DS2x00N-DS4800 Series 20 halaman.
Halaman Cetak4. The scanner is programmed and the AutoLearn Mode ends. The green "ready" LED
is on.
5. Repeat steps 1..3 above to configure all the slaves and master. The maximum
number of scanners is 32, including the master.
6. Connect the master scanner to a PC by means of the Genius™ configuration software.
Master
4
Setup Procedure Using Programming Barcodes
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
Programming done.
Master
Slave 1
Slave n