Cayken KCY-520WEQ Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian untuk Peralatan Cayken KCY-520WEQ. Cayken KCY-520WEQ 16 halaman.
Halaman Cetak
not use recycled water,or else it will affect the smoothness of the runninr water,
causing damage to the water seal and so on.
4.Fix the machine safely
Fix the machine safely.Improper way of installation will not only prevent normal
operation,but be dangerous.
5.Use diamond saw web
The cutter is designed for using diamond saw web.Do not replace the diamond
saw web with other cutting devices.
6.The machine is attached with adjustable clutch
If you clamp down overly in operation or the saw web is stuck by the reinforcing
steel bar suddenly.the clutch will start to protect the saw web from being dam-
aged.If the clutch skids,it does not mean the machine is damanged.Just withdr-
aw the reamer and tighten the clutch and then start the clutch again.
7.Let the saw web run fully before cutting
Turn on the switch,waiting the saw web run fully and then start cutting.
8.Do not touch the running saw web with your hands
Note that never touch the running saw web with your hands,which is dangerous
and will lead to serious results.
9.Aloft operation
If the machine is in aloft operation,please notice to fix it in balanced and steady
place.
10.The cutter makes transverse cutting
Because the machine must use the cooling water in operation,the man motor
is on top when the cutter makes transverse cutting.Contrarily,if the saw web is
on top,water will come into the motor.It is ver y dangerous.
11.Pay attention when the cutter cuts through the floor
When the cutter cuts through the floor,the cut parts will fall down after cutting.
Thereby take protecting measures under the cut parts to protect the safety of
people and properties.
12.Abnormal motion
If the saw web stops or there is abnormal sound in the process of cutting,turn
it off.
13.Clean up the machine after use
To keep the machine's ser vice life, keep it tidy after use.
3