Datalogic GRYPHON M SERIES Referensi Cepat - Halaman 6

Jelajahi secara online atau unduh pdf Referensi Cepat untuk Pembaca kode batang Datalogic GRYPHON M SERIES. Datalogic GRYPHON M SERIES 17 halaman.

CHARGING THE BATTERIES

By placing the reader onto the OM-Gryphon™ cradle or C-Gryphon™ battery

charger it is possible to charge the Gryphon™ M batteries. Make sure the

charging LED goes on.

The LEDs positioned on the cradle signal the charge status, as described in the

following table:

LED

Yellow On = OM-Gryphon™ is powered.

Power on /

Yellow Blinking = OM-Gryphon™ receives data and

Data

commands from the Host or the reader.

Red On = the battery charge is in progress.

Charging

Red Blinking = the battery reconditioning is in progress.

Charge

Green On = the battery is completely charged.

completed

Charging

Red and Green Blinking together = the reader is not

Charge

correctly placed onto the reader.

completed

Reconditioning battery

button

Power on / Data

(yellow LED)

After many recharging cycles NiMh and NiCd batteries may tend to lose their

operating autonomy. This condition can be overcome by positioning the

Gryphon™ M onto the OM-Gryphon™ / C- Gryphon™ charger and pressing the

"battery reconditioning" button.

DATALOGIC

STATUS

Charging

(red LED)

Charge completed

(green LED)