Datalogic Gryphon M200 Panduan Referensi Cepat - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Pembaca kode batang Datalogic Gryphon M200. Datalogic Gryphon M200 18 halaman.
Juga untuk Datalogic Gryphon M200: Panduan Referensi (20 halaman)
Halaman Cetak
DATALOGIC
CHARGING THE BATTERIES
By placing the reader onto the OM-Gryphon™ cradle or C-Gryphon™ battery
charger it is possible to charge the Gryphon™ M batteries. Make sure the
charging LED goes on.
The LEDs positioned on the cradle signal the charge status, as described in the
following table:
LED
Power on /
Data
Charging
Charge
completed
Charging
Charge
completed
Reconditioning battery
button
Power on / Data
(yellow LED)
After many recharging cycles NiMh and NiCd batteries may tend to lose their
operating autonomy. This condition can be overcome by positioning the
Gryphon™ M onto the OM-Gryphon™ / C- Gryphon™ charger and pressing the
"battery reconditioning" button.
2
Yellow On = OM-Gryphon™ is powered.
Yellow Blinking = OM-Gryphon™ receives data and
commands from the Host or the reader.
Red On = the battery charge is in progress.
Red Blinking = the battery reconditioning is in progress.
Green On = the battery is completely charged.
+
Red and Green Blinking together = the reader is not
correctly placed onto the reader.
STATUS
Charging
(red LED)
Charge completed
(green LED)