Datalogic Magellan 800i Panduan Referensi Cepat - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Pembaca kode batang Datalogic Magellan 800i. Datalogic Magellan 800i 17 halaman. On counter presentation, omnidirectional
Juga untuk Datalogic Magellan 800i: Panduan Referensi Cepat (17 halaman)
Halaman Cetak
Quick Reference
Use the Quick Reference Guide (QRG) to find easy connection, scanning
and troubleshooting instructions. For more details, including program-
ming information, reference the Product Reference Guide (PRG), which is
available for download, viewing and printing from the Datalogic website
listed on the back cover of this manual.
Installation
Route the interface cable from the terminal or host. Plug the AC adapter
(if one is used) into a wall outlet and the interface (I/F) cable, then route
and attach the I/F cable to the scanner. Verify operation by presenting
known-good bar codes to the scanner. The unit should beep
its good read LED and send the bar code data to the host or terminal. If
Troubleshooting on page 5
not, refer to
Scanner installation is complete.
1. Beeper and LED behavior is selectable and may have been disabled by
a previous user.
Quick Reference Guide
Connect
Here
I/F Cable
of this guide.
To Host/Terminal
A/C Adapter
(if needed)
1
and/or flash
For 220-230 VAC
adapters, the
cord must be
facing down as
shown in the
illustration. If
installed upwards,
it will pose an
undue strain on the
socket outlet.
1