Datalogic QLM500 Panduan Instalasi - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pembaca kode batang Datalogic QLM500. Datalogic QLM500 17 halaman.
Halaman Cetak
The following diagrams are examples showing layout connections and are not intended to
represent power limits, which instead, depend on each specific application. See "Voltage
Drop and Max Distributed Current Calculations".
ID-NET™ Slave
CAB-AUX04
4
5
DS2100N
3
7
6
CBL-1480-xx
ID-NET™ Multidata Network - DS4800 Master with QLM500 + mixed Slaves with QL300s
CBL-1480-xx
ID-NET™ Slaves
READY
GOOD
SETUP
TRIGGER
LEARN
COM
TEST
STATUS
X
PRESS
INTERFACE
CBL-1480-xx
ID-NET™ Synchronized Network - DS2100N Master with QLM500 + DS2100N Slaves with QL100s
Input Power
EtherNet/IP Interface
External Trigger (for On-Line Mode)
The ID-NET™ network must be terminated inserting an ID-NET™ terminator
into the last QL in the network. ID-NET™ on the QLM500 is internally
terminated.
NOTE
ID-NET™ Slave
CAB-AUX04
4 5
Matrix 410™
3
6
1
EtherNet/IP PLC (Host)
QL100
6
EtherNet/IP Node
ID-NET™ Master
3
1
6
QLM500 INSTALLATION MANUAL
EtherNet/IP Node
ID-NET™ Master
DS4800
3
CBL-1480-xx
7
CBL-1490
QLM500
2
2
4
EtherNet/IP PLC (Host)
External Digital I/O Devices
Aux port for Reader Configuration
ID-NET™ Network
ID-NET™ Terminator
Configuration PC
CAB-AUX03
5
protection
cap
2
4
or
to next
2
EtherNet/IP
node
Configuration PC
5
protection
cap
or
to next EtherNet/IP
node
13