CB Tech CB-VOC Panduan Pengguna - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem Air CB Tech CB-VOC. CB Tech CB-VOC 20 halaman. Drinking water system

Water flow is frequently interrupted by air

Purge any residual air from the system:

Turn the system housing upside down.

Turn on the filtered water faucet (either through the CB-VOC faucet or the

diverter valve).

Allow water to flow for one minute.

Turn off the filtered water faucet (either through the CB-VOC faucet or the

diverter valve).

Odor – rotten eggs, no discoloration on the filter

A rotten egg odor is a sign that H2S (hydrogen sulfide) gas is present in your water source.

If hydrogen sulfide gas is present in your water source, it is recommended that you

rotate DWS usage between 2 filter cartridges. When the DWS emits the rotten egg smell,

remove the filter and allow it to dry upside down to allow the gas to dissipate (the filter

can be reused once dry). Use the second filter in the unit while the first filter is drying.

Odor – rotten eggs, with discoloration on the filter

A rotten egg odor is a sign that H2S (hydrogen sulfide) is present in your water source.

Filter discoloration can determine the source:

•

orange/brownish colors – iron

•

blackish colors – manganese

•

slimy/blotchy colors – decaying organisms

When hydrogen sulfide comes from a source that discolors the filter cartridge and

creates a strong rotten egg odor, the only recommended solution is to change the

filter cartridge.

Color – milky color in the water

Milky color in the water is typically caused by air bubbles in the water. Higher than

normal water pressure through the DWS can create these small air bubbles, but

they do not affect system performance. Air in the water may also be the result of

conditions in your municipal water supply.

For countertop systems, turn on the water and engage the diverter valve while

slightly reducing the water flow. Less water pressure through the system can prevent

air bubbles from forming.

For below-sink systems, adjust the water pressure at the feedwater adapter below

the sink.

Color – black color in the water

Black color in the water is typically caused by residual carbon dust from the filter.

Troubleshooting