CB2 CADET Manual Petunjuk Perakitan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Perabotan Dalam Ruangan CB2 CADET. CB2 CADET 6 halaman. Wardrobe
Juga untuk CB2 CADET: Petunjuk Perakitan (5 halaman)

Halaman Cetak
CB2 CADET Manual Petunjuk Perakitan
cadet
WARDROBE
optional wall mounting assembly
These instructions are for drywall mounting only. For safe installation
it is essential to use hardware appropriate for your wall type. Mount to
wood wall studs whenever possible. If you are unsure of what type of
fasteners to use, consult your local hardware store or a qualified profes-
sional. This product is only a deterrent, it is not a substitute for proper
adult supervision.
A. Attach 2 wall straps to back of unit with 1 mounting screw per strap
as shown. Secure, but do not over tighten with a phillips head screw-
driver.
B. With the assistance of another adult, place the unit in desired location
against the wall. Mark the location of the hole in the wall strap on the
wall. Move the unit out of the workspace.
C. Drill holes slightly smaller in diameter than the plastic anchor. Insert 1
plastic anchor into each hole until they are flush to the wall.
D. Place the unit back into position against the wall. Insert 1 pan head
screw through each wall strap and into the plastic anchor.
Wall mounting is now complete
Made in Thailand- r05
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
WALL
.
wall
strap
mounting
screw
BACK OF UNIT
pan head
screw
plastic
anchor
FRONT OF UNIT
Page 6 of 6