CB2 Finn Lounger Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perabotan Dalam Ruangan CB2 Finn Lounger. CB2 Finn Lounger 3 halaman.

Halaman Cetak
finn
LOUNGER
left side
frame
Insert connector into front crossbar as shown.
Fit bolt of side frame into front crossbar.
Loosely attach with 1 hex nut using a hex
2
wrench as shown.
With the assistance of another
adult, fit barrel screw of left side
frame into corresponding hole of
back frame. Secure barrel screw
by inserting a set screw into the
barrel nut. Loosely secure set
screw, using a screwdriver. Make
sure set screw securely engages
the barrel screw.
B. Attach 1 cap as shown.
C. Loosely attach bracket of back
frame to left side frame with 2 hex
bolts as shown using a screwdriver.
Do not over tighten the bolts.
4
Made in China - r08
NOTE: Do not fully
tighten the bolt
front
crossbar
C
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
NOTE: Do not over
tighten the screw
left side
frame
center rail
A. Loosely attach center rail to left side frame
with 1 allen bolt using an allen wrench.
B. Fit dowels of support leg into
corresponding hole of center rail and secure
3
with 1 support leg bolt using a screwdriver.
A
left side
frame
C
A
A
B
support
leg
A
B
back frame
Page 2 of 3