CB2 Rodney Nightstand Petunjuk Perakitan - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Perabotan Dalam Ruangan CB2 Rodney Nightstand. CB2 Rodney Nightstand 3 halaman.

Halaman Cetak
rodney
NIGHTSTAND
NOTE: Do not over
tighten the bolts.
NOTE: Make sure left
and right side panels are
assembled with grooves
facing back as shown
left side
panel
Position top panel as shown. Fit pre-assembled
dowels of left and right side panels into
corresponding holes of top panel. Secure left and
right side panels to top panel with 4 flat
washers, 4 spring washers and 4 bolts as
1
shown, using a phillips head screwdriver.
Attach 2 legs to assembled unit by turning each
3
leg clockwise as shown.
Made in Vietnam - r04
right side
panel
top panel
leg
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
B
bottom panel
A. Slide back panel into grooves of left and right
side panels.
B. Fit pre-assembled dowels of left and right side
panels into corresponding holes of bottom panel.
Secure left and right side panels to bottom
panel with 4 flat washers, 4 spring washers and
2
4 small bolts, using a screwdriver.
left drawer
side
L
Fit pre-assembled dowels of drawer front into
corresponding holes of left drawer side. Secure
drawer front to left drawer side with 2 screws
as shown, using a phillips head screwdriver. Do
4
not over tighten the screws.
B
A
back panel
NOTE: Do not over
tighten the screws
drawer
front
NOTE: Make sure glide
is positioned as shown
Page 2 of 3