CB2 SAGA Petunjuk Perakitan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Perakitan untuk Perabotan Dalam Ruangan CB2 SAGA. CB2 SAGA 5 halaman. Credenza
Halaman Cetak
saga
CREDENZA
NOTE: Make sure arrow
on each cam points toward
nearest edge with holes
B
middle panel
A. Insert 4 wood dowels and 2 cams into 2 top
and bottom partitions as shown. Make sure
arrows on each cam points toward nearest edge
with holes.
B. Insert 4 wood dowels, 2 cam screws and 4
1
cams into middle panel as shown.
NOTE: Make sure cams of partition
are positioned as shown
middle panel
NOTE: Do not over
tighten the bolts
A. Fit dowels of top partition into corresponding
holes of middle panel as shown.
B. Attach top partition with 2 large bolts, 2 spring
washers and 2 flat washers as shown. Secure,
but do not over tighten, bolts with a phillips head
3
screwdriver.
Made in Vietnam - r08
top and bottom
A
partitions
top
partition
NOTE: Make sure cam
screws of middle panel
are positioned as shown
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A
left and right
side panels
B
top panel
A. Insert 4 wood dowels, 2 cam screws and 2
cams into left and right side panels as shown.
2
B. Insert 6 cam screws into top panel as shown.
middle panel
bottom
partition
Fit dowels of bottom partition into corresponding
holes of middle panel as shown. Using a
screwdriver, turn each cam clockwise until it
4
securely engages each cam screw.
Page 2 of 5