CB2 Veer Panduan Perakitan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Perabotan Dalam Ruangan CB2 Veer. CB2 Veer 6 halaman. Wardrobe

CB2 Veer Panduan Perakitan
veer
WARDROBE
A
A. Fit top panel onto dowels of assembly as
shown. Attach top panel to assembly with 6
medium bolts, 6 large spring washers and 6
large flat washers, using an allen wrench.
B. Attach top panel to partition with 2 small bolts,
7
2 small spring washers and 2 small flat washers,
using a screwdriver.
pull
Attach 1 pull to right and left doors with 2 bolt
caps and 2 pull bolts as shown, using an allen
9
wrench.
Made in Vietnam - r04
B
A
B
top panel
right and
left doors
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
NOTE: Do not
over tighten the
screws
With assistance of another adult, position unit
upright and secure back panel with 7 back
8
screws as shown, using a screwdriver.
B
A
A
A. Using a screwdriver, attach 3 hinges to left
and right doors with 2 hinge screws per hinge
as shown.
B. Attach hinges of left and right doors to side
10
panels with 4 hinge screws per hinge as shown.
NOTE: Reference diagram
for adjusting hinges at the
end of these instructions
B
Page 4 of 6