Datalogic S70-5-E3-PI Panduan Memulai Cepat - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Aksesori Datalogic S70-5-E3-PI. Datalogic S70-5-E3-PI 10 halaman. Analogue output

Datalogic S70-5-E3-PI Panduan Memulai Cepat

TECHNICAL DATA

Sensing Beam:
Supply Voltage:
Power and Current Consumption
(exclusive of load):
Supply Protection Circuitry:
Delay at Power Up:
Output Configuration:
Discrete Output Rating:
Analogue Output Recovery Time:
Analogue Output Ripple Content (p-
p):
Analogue Output Rating:
Output Protection:
Construction:
Environmental Rating:
Operating Temperature:
Storage Temperature:
Humidity:
Connections:
Response Speed and Features
Description
High Speed
Fast
Standard
Long Range
Extra Long Range
NOTE:
These values are valid for opposed mode sensing using a 1 mm diameter core plastic fiber.
Voltage output models:
Current output models:
Standard display mode:
ECO display mode:
Protected against reverse polarity, overvoltage, and transient voltages
500 milliseconds max.; outputs do not conduct during this time
Voltage Output Models: 1 analogue voltage output (user configurable as 1 to 5 V or 0 to 10 V)
Current Output Models: 1 analogue current output (4 to 20 mA) with 1 current sinking (NPN)
100 mA maximum combined load—analogue plus discrete outputs
(derate 1 mA per °C above 30 °C)
OFF-state leakage current: < 5 A at 30 VDC;
ON-state saturation voltage: NPN: < 1.5 V; PNP : < 2 V
< 2× the selected response speed
< 0.5% of the full scale analogue output
Voltage Outputs:
Current Outputs:
Protected against output short-circuit, continuous overload,
transient over-voltages, and false pulse on power up
Black ABS / Polycarbonate alloy (UL94 V-0 rated)
housing, clear polycarbonate cover
IEC IP50, NEMA 1
10 °C ... +55 °C
20 °C... +85 °C
50% at +50 °C maximum relative humidity (non- condensing)
4-pin M8 connector
Response
Repetition Period
Speed
250 μs
50 μs
500 μs
50 μs
1 ms
50 μs
4 ms
50 μs
12 ms
50 μs
Visible red, 635 nm
12 to 30 VDC Class 2 (10% maximum ripple)
10 to 30 VDC Class 2 (10% maximum ripple)
840 mW, Current consumption < 35 mA at 24 VDC
672 mW, Current consumption < 28 mA at 24 VDC
with 1 current sinking (NPN) or 1 current sourcing (PNP)
discrete output, depending on model.
or 1 current sourcing (PNP) discrete output, depending on model
2.5 kOhm minimum load resistance
1 kOhm maximum load resistance at 24 V;
maximum load resistance = [(Vcc - 4)/.02] Ohms
Cross-Talk
Repeatability
Avoidance
50 μs
No
75 μs
Yes
90 μs
Yes
90 μs
Yes
90 μs
Yes
9
Energy
Maximum
Efficient Light
Range
Resistance
No
900 mm
No
1125 mm
Yes
1125 mm
Yes
1462.5 mm
Yes
2250 mm