DUSTER 00301 Panduan Pengoperasian & Pemeliharaan - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengoperasian & Pemeliharaan untuk Pembersih Udara DUSTER 00301. DUSTER 00301 8 halaman. Mobile prep station
Halaman Cetak
Step 4: Get Your Workspace Ready
Wear proper protective breathing apparatus when performing this task.
Using the Duster 3000 Downdraft for the first time will dislodge dust that has
already settled in the immediate area (light fixtures, support beams, etc.)
We recommend cleaning the surrounding area before working on anything that
may be affected by airborne dust.
Turn on the unit and use compressed air to cause any settled dust to become
airborne.
Allow the unit to run as needed until the airborne dust has cleared. You are
now ready to use your Duster 3000 Downdraft.
Digital Airflow Gauge / Operating Lights
The digital readout indicates the airflow volume in cubic feet per minute (CFM).
Optimal airflow with clean filters should be over 3000 CFM.
As the filters trap particles, the CFM will drop.
Green light indicates the machine is on and is in good working order.
Yellow light indicates the filters are dirty and need cleaning or replacing.
The Duster 3000 Downdraft will automatically shut down when the yellow light
comes on to prevent permanent damage to the motor.
The yellow light has been factory preset to go off around 2000 CFM or lower.
Positioning the Duster 3000 Downdraft
For the greatest effectiveness, position the unit so that the downdraft plenum is
directly above your work area. This will ensure that dust or paint overspray is
directed towards the intake filters.
Reduce Inhalation of Harmful Airborne Particles
you remove your mask or breathing apparatus. Dust becomes visible at 18
microns and this machine will capture harmful particulate down to 3 microns. At all
times, technicians must wear either a compressed air fed respirator, Class D, or
proper industry approved respirators while sanding or painting when operating this
machine. We recommend that the unit also be left on during business hours,
continuously. This machine will be recirculating existing shop air continuously to
remove airborne contaminants even after removal of personal safety breathing
equipment.
damage to your lungs when