CBC LME22 Petunjuk Pengoperasian & Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian & Panduan Pengguna untuk Monitor CBC LME22. CBC LME22 19 halaman.

Frequently Asked Questions

Power button does not respond

• Check the power cord to ensure that it is securely plugged

• Ensure there is electrical power coming from the AC outlet.

• Unplug the power cord of the monitor from the AC outlet,

No image on the screen

• Ensure that the DB-15 signal cable is properly connected to

• Check the DB-15 signal cable connector on both ends for

• The display card should be properly seated in its card slot.

• Ensure that the computer's power switch is ON.

• Ensure that the monitor's power switch is ON.

•

Power LED is RED (with no image on the screen)

• Check the DB-15 signal cable to ensure that it is properly

• Check the DB-15 signal cable on both ends for bent or

• Make sure the computer is not in a power-saving mode

No sound coming from the audio speakers

• The audio cable should be connected to the lineout on the

• Inspect the audio cable for any apparent damage. Double

into the monitor base and also into the electrical outlet.

Use another device to check for power.

wait a few minutes, then to plug the power cord into the AC

outlet again. This will reset the monitor and power supply.

the display card/computer.

bent or pushed-in pins.

Unplug the power cord of the monitor from the AC outlet,

wait a few minutes, then to plug the power cord into the AC

outlet again. This will reset the monitor and power supply.

attached to the graphics display card.

pushed-in pins.

(move the mouse or press a key on the keyboard).

audio card and the line-in on the monitor. Ensure that the

audio cable is properly connected.

check by switching to another audio cable to see if the

audio works.

1DUVGL1B_A2