Dustless 16 Series Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penyedot Debu Dustless 16 Series. Dustless 16 Series 8 halaman.

SETUP

1. Remove entire contents of box.

2. Slide legs into slots with the legs with the

hooks in the back. Screw in screws.

3. Attach tool tray.

4. Place intermediate on barrel. Use clips to

secure in place.

5. Slide one end of the hose into the port.

Slide desired attachments on to the other

end of the hose.

Customer Service Helpline 1.800.568.3949 dustlesstools.com

WUNDERBAG INSTALLATION

1. Place the cardboard collar with the rubber

gasket securely over the intake port on the

inside of the barrel.

2. Reach inside the port and with your

fingers press cardboard tight and secure

around port.

USAGE

DRY PICKUP

1. Barrel should be emptied of any wet

waste. Filters can remain in place.

2. Connect hose and desired attachment.

3. As suction is reduced stop to clean or

replace filters. (Refer to Clean Filters or

Filter Installation)

4. After use or when barrel is full turn off

vacuum and disconnect from outlet.

5. Remove intermediate from barrel.

6. Empty barrel and/or remove WunderBag.

Note: To avoid back strain, do not lift a

full barrel/bag.

1. Vacuum should be emptied of any dry

waste. Filters can remain in place. Note:

Should filters become wet, dry both filters

thoroughly before continued use.

2. Connect hose and desired attachment.

3. After use or when barrel is full turn off