Dusun DSGW-040 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Gerbang Dusun DSGW-040. Dusun DSGW-040 3 halaman.

User Manual

1、Product Description

The Dusun Smart Gateway is the"brain" of control for smart devices.Used to connect and control a variety of

intelligent sensors and controllers.Create and manage various smart life scenarios through smart home clients,

and realize intelligent device automation linkage.

2、Indicator Description

Power Indicator

The green light is always on, the gateway is powered on, the green light is off, and the gateway power is off.

Signal indicator

The yellow light flashes, that is, the gateway is communicating with the child device.

Network indicator

The red light is always on, that is, the gateway cannot connect to the network.

The red light is off, indicating that the network is communicating normally.

3、Jack Description

Pairing button

LAN port - You can use a computer to connect to the LAN port of the gateway through a network cable.

Password: root, you can enter the debugging page of the gateway.

WLAN port - This port allows the

gateway to connect to the LAN.

Reset hole

Device reset :Long poke reset hole for more than 8s, the gateway enters the reset mode, after the completion,

the factory settings will be restored, and all the pairing information in the gateway will be cleared.

4、Device Access

Search for "Tuya smart" in the app store to download the smart device client.

2.Power on the gateway. At the same time, the network cable connects the WLAN port of the gateway to the

LAN port of the router. The mobile phone connects to the wifi of the router to ensure that the mobile phone

and the gateway are in the same network.

3.Open the Tuya smart app and follow the prompts to quickly connect to the new device, or add the gateway

you want to connect via the "+" in the upper right corner. Follow the prompts to continue.

4.After the gateway is successfully connected, refer to the "Add Device" section of the sub-device manual.

After the addition is successful, you can view the sub-device list on the gateway device page and set the scene.

5、Installation Notes

Select the center location of the smart device to be installed to ensure normal communication with each

bound smart device.

6、Basic Parameters

Product color: white

Working temperature: -5°C ~ +60°C

Working humidity: 5%~95% (no icing, condensation)

Input voltage: 100V~240V AC/50~60HZ

Wi-Fi working mode: AP/STA mode switching

Network interface: 1 WLAN, 1 LAN

The product contains an LTE Module FCC ID: XMR201707BG96