Datalogic POWERSCAN PBT7100 guide Panduan Referensi Cepat - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Terminal sentuh Datalogic POWERSCAN PBT7100 guide. Datalogic POWERSCAN PBT7100 guide 16 halaman. Cordless imaging reader
Juga untuk Datalogic POWERSCAN PBT7100 guide: Panduan Referensi Cepat (20 halaman)
Halaman Cetak
Getting Started
Connection
shows how to connect the Base Station to a terminal, PC or
Figure 1
other host device. Turn off the host before connection and consult the
manual for that equipment (if necessary) before proceeding.
Base Station Connection and Routing —
Interface (I/F) Cable connectors into their respective ports in the under-
side of the Base Station (see
the cables around the routing clips and back through the routing chan-
nel to the front of the Base Station as shown, or the cables can be fed
directly out the back of the Base Station via the routing clips.
Optional Power Connection —
wall socket with the cable facing downwards (as shown in
prevent undue strain on the socket.
CAUTION
Figure 1
. Connecting the Base Station
Power Cable
Routing
Clips
Bottom of Base Station
Quick Reference Guide
Figure 1
Plug the AC Adapter into an approved AC
This Base Station MUST be used with a Datalogic approved power
supply. It is not designed to obtain its power off of the terminal
(POT). Connection to a host terminal without first connecting the
external power supply may result in damage to the terminal.
I/F
Cable
Routing
Channel
I/F Cable
Base
Station
Fully insert the Power Cable and
). Alternatively, you can either loop
Power Cable
) to
Figure 1
Optional
AC Adapter
7