CBM SST 2200B Instalasi dan Penggunaan Pertama - Halaman 4
Jelajahi secara online atau unduh pdf Instalasi dan Penggunaan Pertama untuk Peralatan Laboratorium CBM SST 2200B. CBM SST 2200B 4 halaman. Steam sterilizer
Halaman Cetak
1. After having introduced the material to be sterilized in the chamber, close the door to its
limit, then press the DOOR LOCK
the display
2. Select the desired cycle by pressing the relevant icon (example
cycles Table on the User manual.
3. Press the DRYING
information bar.
4. After having selected the DRYING cycle, press the START key.
5. From this moment the door is fully locked and the appliance operates automatically until
the end of the cycle.
6. If the cycle is completed successfully the appliance warns of the END of cycle through
sound impulses and the writing CYCLE COMPLETED on the display.
7. Upon completion of the cycle press the ENTER
the door by pressing the OPEN DOOR
8. Remove the material inside the chamber
Make attention to the hot temperature
Rev. 00 – 06/08/2014
C.B.M. S.r.l. a socio unico - Medical Equipment –
Via Castello 10, 26038 Torre dé Picenardi (CR) - Italy
STERILIZATION CYCLE
key, the icon DOOR LOCKED will appear on
key and select the drying cycle desired, also shown in the
Installazione SST1700-2200 r0 EN.DOC
key. It is now possible to open
key.
), see also the
pag. 4 di 4