Datalux LMV-XG12-xxx Panduan Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Monitor Datalux LMV-XG12-xxx. Datalux LMV-XG12-xxx 11 halaman. 12.1” monitor product

Halaman Cetak
Datalux LMV-XG12 & LMV-XG12i - Operation Manual
7
For older LMV10xxx product and/or latest
For LMV-XG12/XG10 product only *
LMV-XG12/XG10 product
*May purchase square plate o f SVP-VESA mount only. Will retro-fit onto any base unit.

Operation

The Datalux LMV-XG12/LMV-XG12i 12.1" monitors offer some unique con figuration options to make
them well-suited for whatever their application. The front of the unit, including the separation of front and
back enclosure is IP54 rated. A configuration may be ordered to provide a dead front in place of the
standard membran e switch configu ration. This brings the front of the unit up to a rating of IP67.

Front Panel Controls

The standard operation is through the membrane switch.
Membrane switch function label.
ON/OFF SW
BACKLIGHT "INSTANT" ON/OFF SW
DECREA SE LUMINA NCE SW
INCREA SE LUMINA NCE SW
NOTE: The power LED will flash if an input voltage of less than 8VDC is noted.
NOTE: When power is applied, the auto-on feature o f the LMV-XG12/LMV-XG12i will turn the unit on if
it was on when power was removed. Therefore, if an en closed unit is on, it will remain on whenever power
is available - if the power glitches or turns off, you will not have to turn the LMV-XG12/LMV-XG12i on.
Once the LMV-XG12/LMV-XG12i is turned off, it will remain off until the power button is pressed again.
Page 7